Product Manual

4 Security
12 100_0202_si_0011.fm
4.7 Specific safety instructions – Vibratory plates
4.7.1 External influences
In the case of the following external influences, the vibratory plate may not be operated:
 In heavy rain on sloped surfaces. Risk of slipping!
 Oil field environments – methane leaks from bottom. Explosion hazard!
 In dry, flammable vegetation. Fire hazard!
 In potentially explosive areas. Explosion hazard!
4.7.2 Operational safety
 When operating the machine, make sure that no gas, water, or electric lines are damaged.
 The machine must not be operated in tunnels or enclosed spaces.
 Pay maximum attention near drops or slopes. Risk of crashing!
 The operator must not leave the machine while it is in operation.
 Do not leave the machine unattended. Risk of injury!
 Delimit spacious workspace and restrict access to unauthorized individuals. Risk of injury!
 Machine operators must ensure that people in the working area keep a minimum distance of 2 meters
from the running machine.
 Do not use any starting aid sprays. These can cause misfires as well as engine damage. Fire hazard!
 When operating the machine on sloped surfaces, always approach slopes from below and always
stay above the machine on a slope. The machine could slip or tip over.
 Do not exceed max. allowable slanting position of the machine – possible failure of the engine
lubrication, see chapter Technical Data.
4.7.3 Minimum safety distances
Compaction work near buildings can cause damage to buildings. Therefore, all potential effects and
vibrations on surrounding buildings must be checked in advance.
The relevant rules and regulations for measuring, evaluating and reducing vibration emissions -
especially the DIN 4150-3 - must be considered.
Wacker Neuson assumes no liability for any damage to buildings.
4.8 General safety instructions - Combustion engines
The following notes must be observed:
 Before starting work, check the engine to ensure there are no leaks and cracks in the fuel lines, tank
and fuel cap.
 Do not operate a defective engine. Replace damaged parts immediately.
 The pre-set engine speed may not be adjusted. This could lead to engine damage.
 Make sure that the exhaust system of the engine is free of debris. Fire hazard!
 Switch off the engine and allow to cool before refueling.
 Use the correct fuel type. The fuel may not be mixed with other liquids.
 Use clean filling aids for refueling. Do not spill fuel. Immediately wipe up any spilled fuel.
 The engine may not be started near spilled fuel. Explosion hazard!
 For operation in partially closed spaces, sufficient ventilation and aeration must be ensured. Do not
inhale exhaust fumes. Risk of poisoning!
 The engine surface and exhaust system can quickly become extremely hot. Risk of burns!
NOTICE
This machine is equipped with a certified engine (e.g. EU type approval, EPA).
Adjusting the revolutions per minute (rpm) impacts the certification and the emissions. Settings for
this engine may only be carried out by a professional.
For more information, contact the engine manufacturer or your Wacker Neuson contact partner.