Operator`s manual

Maintenance
T01137GB.fm 48
4.5 Cleaning the filter cup
Close the fuel tap. Remove the filter cup with the o-ring and wash it out
with non-combustible and low-flammable solvent. Allow it to
completely dry, then reinstall it and tighten it firmly. Open the fuel tap
and check for leaks.
4.6 Idle setting
∗ Start the engine and let it warm up to its normal operating temperature.
∗ Adjust the idle speed limiting screw while the engine is running in order
to reach the prescribed idle speed. Prescribed idle speed: 1,400 ± 150
rpm.
2 Idle speed limiting screw