Operator`s manual

3 Safety
19
Cleaning the engine
Clean the engine when it is cool to remove any dirt.
Do not use gasoline or solvents. Danger of explosion!
Health hazard due to exhaust fumes
Warning
The engine's exhaust fumes contain chemicals which are known to the State of
California to cause cancer, congenital defects or other reproductive anomalies.
Notes on the EPA engine
Caution
This machine is equipped with an EPA-certified engine.
Modifying the engine speed influences the EPA certification and emission. The
engine may only be set by a skilled technician.
For more detailed information, contact your nearest engine or Wacker Neuson
representative.
3.7 Safety during floor saw operation
Belt guard
Never operate the machine without a belt guard!
Exposed belts and belt pulleys are dangerous and can cause serious injuries if
they pull in any part of your body or if parts are ejected.
Danger of falling over
Operate the machine so that it cannot tip over or fall down from bordered areas,
edges and steps.
Cutting blade guard
Never operate the machine without a cutting blade guard.
The cutting blade guard performs the following functions:
Protects the operator from the rotating cutting blade.
Diverts workpiece particles and sparks or chips from a damaged cutting
blade away from the operator.
Only operate the machine when the cutting blade guard is folded down.
Make sure that the cutting blade guard and its limit stops are not damaged or
worn.