Product Manual
Table Of Contents
- 1 CALIFORNIA Proposition 65 Warning
- 2 Preface
- 3 Introduction
- 4 Security
- 4.1 Policy
- 4.2 Proper use
- 4.3 Structural changes
- 4.4 Areas of responsibility of the operator
- 4.5 Operator responsibilities
- 4.6 Personnel qualification
- 4.7 Residual dangers
- 4.8 General safety instructions
- 4.9 Specific safety instructions - Vibratory rammer AS
- 4.10 General safety instructions – fuel, lubricants and coolants
- 4.11 Maintenance
- 4.12 General safety instructions - Rechargeable battery (accessories)
- 4.13 General safety instructions - Battery charger (accessories)
- 4.14 Personal Protective Equipment
- 4.15 Behavior in dangerous situations
- 5 Safety and information labels
- 6 Setup and function
- 7 Components and operator's controls
- 8 Transport
- 9 Storage
- 10 Operation and use
- 11 Maintenance
- 12 Troubleshooting
- 13 Disposal
- 14 Disposal
- 15 Accessories
- 16 Technical data
- 17 Glossary
10 Operation and use
28 100_0201_op_0006.fm
10.5 Decommissioning
1. Slowly pull the starter lever backward until the detent.
2. The safety lever will lock into place with the starter lever and hold this in the OFF position.
3. Wait until the machine has come to a complete standstill.
10.6 After operation
Item Designation Item Designation
1 Starter lever 2 Start button on / off
3 Safety lever
NOTICE
Park the machine so that it cannot tip over, fall or slip away.
CAUTION
Hot surfaces
Wear protective gloves.
1
2
3