Product Manual
Table Of Contents
- 1 CALIFORNIA Proposition 65 Warning
- 2 Preface
- 3 Introduction
- 4 Security
- 4.1 Policy
- 4.2 Proper use
- 4.3 Structural changes
- 4.4 Areas of responsibility of the operator
- 4.5 Operator responsibilities
- 4.6 Personnel qualification
- 4.7 Residual dangers
- 4.8 General safety instructions
- 4.9 Specific safety instructions - Vibratory rammer AS
- 4.10 General safety instructions – fuel, lubricants and coolants
- 4.11 Maintenance
- 4.12 General safety instructions - Rechargeable battery (accessories)
- 4.13 General safety instructions - Battery charger (accessories)
- 4.14 Personal Protective Equipment
- 4.15 Behavior in dangerous situations
- 5 Safety and information labels
- 6 Setup and function
- 7 Components and operator's controls
- 8 Transport
- 9 Storage
- 10 Operation and use
- 11 Maintenance
- 12 Troubleshooting
- 13 Disposal
- 14 Disposal
- 15 Accessories
- 16 Technical data
- 17 Glossary
10 Operation and use
100_0201_op_0006.fm 25
3. With the other hand, lift the rechargeable battery by the handle and carefully insert it into the provided
guide rail.
4. Insert the rechargeable battery by the handle until you hear a clearly audible snapping into place
sound of the lock. Make sure the rechargeable battery is firmly seated.
10.2 Notes about operation
NOTICE
Note the direction of installation when installing the rechargeable battery. The connections
must point in the direction of the protective cover.
Item Designation Item Designation
1 Protective cover 2 Lock
WARNING
Danger of tipping
Ensure sufficient stability.
There is a serious risk of injury from slipping or tipping over of the machine.
Always secure the machine from tipping over.
Place the machine on level surface with a firm substrate.
DANGER
Danger of crushing
It is possible to crush hands and feet.
Work carefully.
CAUTION
Beware of physical impairments caused by vibration.
Take breaks periodically.
1
2