Product Manual
Table Of Contents
- 1 CALIFORNIA Proposition 65 Warning
- 2 Preface
- 3 Introduction
- 4 Security
- 4.1 Policy
- 4.2 Proper use
- 4.3 Structural changes
- 4.4 Areas of responsibility of the operator
- 4.5 Operator responsibilities
- 4.6 Personnel qualification
- 4.7 Residual dangers
- 4.8 General safety instructions
- 4.9 Specific safety instructions - Vibratory rammer AS
- 4.10 General safety instructions – fuel, lubricants and coolants
- 4.11 Maintenance
- 4.12 General safety instructions - Rechargeable battery (accessories)
- 4.13 General safety instructions - Battery charger (accessories)
- 4.14 Personal Protective Equipment
- 4.15 Behavior in dangerous situations
- 5 Safety and information labels
- 6 Setup and function
- 7 Components and operator's controls
- 8 Transport
- 9 Storage
- 10 Operation and use
- 11 Maintenance
- 12 Troubleshooting
- 13 Disposal
- 14 Disposal
- 15 Accessories
- 16 Technical data
- 17 Glossary
4 Security
14 100_0201_si_0002.fm
4.13.2 Extension cable and cable drum
The following points must be observed in order to minimize the danger of injuries, fire, electric
shock and material damage:
The extension cable and cable drum must be inspected and undamaged.
Only use extension cables with grounded conductors and a grounded conductor terminal to the plug
and coupling.
Only use inspected extension cables and cable drums that are suitable for construction site use.
Damaged extension cables and cable drums may not be used and must be replaced immediately.
Cable drums and multi-pole plug receptacles must have the same requirements as extension cables.
Protect extension cables, cable drums, multi-pole plug receptacles and connection couplings from
moisture.
The extension cables and cable drums must be completely unrolled before operation.
4.14 Personal Protective Equipment
NOTICE
To prevent personal injury when handling this machine, personal protective equipment
must be worn when working on or around this machine.