Product Manual

12 Maintenance
28 100_0101_mt_0012.fm
12 Maintenance
12.1 Maintenance schedule
The vibrator head assembly is filled with oil by the manufacturer and is therefore maintenance-free.
The oil cannot be replaced in the IR30 vibrator head. The vibrator head assembly must be
replaced by the service department of the Wacker_Neuson contact partner.
12.2 Maintenance jobs
The machine must be separated from the power supply before maintenance work starts!
Perform maintenance work in a workshop on a workbench. This has the following advantages:
 Protection of the machine from dirt on the construction site.
 A level and clean working surface makes work easier.
 Small parts are easier to see and therefore are harder to lose.
WARNING
Improper handling may result in injury or serious material damage.
 Please read and follow all safety instructions in this operator's manual.
WARNING
Risk of death from electric shock in the event of improper work.
 According to the applicable guidelines, opening the machine, repairing and a
subsequent safety control may only be performed by a qualified electrician.
 Replacement of the plug or the supply cord shall always be carried out by the service
department of your Wacker Neuson contact partner.
Activity Daily before
operation
Daily after
operation
Every 100
hours
Visual inspection for damage and leaks. 
Check to ensure the connection link is firmly seated. 
Check the Bodyguard® for damages. 
Function testing the Bodyguard® with the test button. 
Clean machine and components. 
Check wear dimensions of the vibrator head. 
NOTICE
if the lower part of the vibrator head assembly needs to be replaced, fill it with sufficient oil. Secure
the lower part of the vibrator head assembly accordingly. Have this work performed by the service
department of the Wacker Neuson contact partner.
CAUTION
Health risk from fuel, lubricants and coolants.
 Do not inhale fuel, lubricants, coolants or vapors.
 Avoid contact of skin or eyes with fuel, lubricants and coolants.