Product Manual

11 Operation and use
100_0101_op_0013.fm 27
1. Slowly pull the vibrator head out of the freshly mixed (green) concrete and hold it in the air.
2. Switch the machine off with the ON/OFF switch.
3. Wait until the machine has come to a complete standstill.
4. Slowly set machine down.
5. Pull the plug out of the plug receptacle.
6. Let the machine cool.
11.6 After operation
11.6.1 Clean the machine
Clean all components after each operation.
 Only clean machine with water and wipe with a damp, clean cloth.
11.6.2 Cleaning the Bodyguard®
 Do not clean the Bodyguard® with high pressure or steam cleaners!
 Do not exert any hammer blows on the Bodyguard® to remove contaminations!
 Do not submerge the Bodyguard® in water!
 Do not use any fuels or solvents.Explosion hazard!
NOTICE
Do not bend the protection hose and power cable.
NOTICE
Do not clean the machine with high pressure or steam cleaners!
Do not hit the Quickflex coupling with hammer blows to remove dirt!
NOTICE
With the machine running, the concrete residue can be removed from the vibrator head by
immersing it in a gravel bed.