Product Manual

9 Quickflex Coupling Assembly

20 100_0101_ot_0003.fm

9 Quickflex Coupling Assembly

As needed, the Quickflex coupling enables the exchange of the IRflex vibrator head. This can thus be

exchanged for a new or different vibrator head with various sized diameters and protective hose lengths.

9.1 Carry out preparations

The exchange of IRflex vibrator heads may only be carried out in a clean and dry environment

with an unplugged FUflex inverter:

 Disconnect the machine from the power supply.

9.2 Separate the IRflex vibrator head from FUflex inverter

1. Remove dirt accumulation within the area of the Quickflex coupling, see chapter Cleaning after

operation – Cleaning the machine.

2. Open the protective cap and retaining screw using Allen wrench.

3. Unscrew the Quickflex coupling.

4. Separate the IRflex vibrator head from FUflex inverter.

NOTICE

Only use an operational, fully assembled machine - IRflex vibrator head with FUflex

inverter on the job site!

Item Designation Item Designation

1 FUflex inverter 3 Quickflex coupling

2 IRflex vibrator head 4 Retaining screw and protective cap