RECHARGEABLE BATTERY CHARGER Item#6506 INSTRUCTION MANUAL -0-
IMPORTANT SAFEGUARDS PLEASE READ AND SAVE THESE INSTRUCTIONS WARNING The Tevion Charger is designed for indoor use at normal temperature. Keep the charger away from direct sunlight, moisture, or direct heat. Use only the adaptor that comes with the Tevion Charger. The battery charger is designed to charge only Ni-Cd and Ni-MH rechargeable batteries of size AAA, AA, C, D and 9V. Please do not attempt to charge any other type of battery to avoid safety hazard.
TABLE OF CONTENTS CONTENTS Page - IMPORTANT SAFEGUARDS 1 - INSTRUCTIONS 3 - CHARGE AND DISCHARGE TIME 4 - QUICK START 5 - SELF-TEST MODE 6 - DEEP CONDITIONING MODE 7 - TECHNICAL SPECIFICATIONS 8 -2-
INSTRUCTIONS Tevion Battery Charger is designed to charge only Ni-Cd (Nickel Cadium) and Ni-MH (Nickel Metal-Hydride) type of rechargeable batteries. This Tevion Charger has a micro-processor built in that can automatically control the charging of Nickel Cadmium (Ni-Cd) and Nickel Metal-Hydride (Ni-MH) rechargeable batteries of AAA, AA, C and D size. It use - V to control the charging of Ni-Cd batteries and + V for Ni-MH.
CHARGE AND DISCHARGE TIME (Reference for 2 rechargeable batteries only) Battery Size Capacity(mAh) AAA/Micro 180 240 500 1100 1800 2000 2000 4000 100-120 AAA/Mignon C/Baby D/Mono 9V/Block Approximate Charge Time 17min 22min 47min 103min 2 4/5hr 3 1/8hr 3 1/8hr 6 1/4hr 10 to 14hr Note: The charge time varies with brand/age/condition of rechargeable battery.
QUICK START 1. 2. 3. Plug the AC/DC adaptor into the electrical outlet, and the jack plug into the charger. Open the lid by sliding down the “Open” button. Insert the rechargeable batteries you want to charge. For AAA, AA, C or D size, place two pieces of battery of the same size into the same compartment. For 9V batteries, place in either/both slots between the two compartments. (Step 4 to 7 is for AAA, AA, C or D size rechargeable batteries) 4.
SELF TEST MODE The Tevion Charger can perform a self test to check if the charger is fully functional. When a “beep” sound is heard, the charger is ready to be used. 1. 2. 3. Remove all batteries and unplug the jack plug from charger. Connect the AC/DC adaptor to the wall electric socket. Push the DISCHARGE button and hold it down, and then insert the jack plug into the charger.
DEEP CONDITIONING MODE This mode can rescue rechargeable batteries damaged by memory effect. It will automatically discharge and recharge the batteries in both compartments three times. 1. 2. 3. 4. 5. 6. Insert batteries into either one or both of the compartments. Please note that this mode will automatically discharge and recharge the batteries in both compartments three times. Press and hold the yellow DISCHARGE button until the READY LEDs begin to flash and the charger makes “beep” sound.
TECHNICAL SPECIFICATIONS Model MW5798 Input: DC 12V 500mA 120V with AC/DC Adaptor MW1250UC Charge Current: Constant pulse current of 800mA Boost Charge Current: 1/2 Constant Pulse Current Trickle Charge Current: 1/10 Constant Pulse Current Discharge Current: 300mA Detection: - V, + V -8-
LIMITED WARRANTY Item # 6506 Thank you for purchasing a top quality Tevion product. This Rechargeable Battery Charger was tested and meets our stringent quality standards. This product is warranted to be free from manufacturing defects in original materials, including original parts, and workmanship until November 22, 2005 or 1 YEAR AFTER DATE OF PURCHASE WITH PROOF OF RECEIPT.
