User`s manual

Autoclamp Goliath Guillotine Pipe Saw
40 06-150-520-MAN Wachs Subsea
Figure 6-5. There are two fittings on the ends of the
feed frame (top photo), and six fittings on the feed
shaft mount and one on the feed slide housing (bottom
photo).
Figure 6-6. There are two grease fittings on the
optional hydraulic autofeed motor.
Also apply grease to the bow guide plate at the ends of the
frame. Use a brush or a clean, dry cloth to wipe grease onto
the plates.