User`s manual

Autoclamp Goliath Guillotine Pipe Saw
34 06-150-520-MAN Wachs Subsea
Figure 5-16. The photo illustrates the controls on the
universal control panel. (Some UCP models have a
different arrangement; see labeling on the UCP.)
4.
Slightly lower the crane holding the saw to allow the
clamp to hold the saw’s weight. Leave the crane
attached to the saw.
Clamp pressure gauge
Clamp direction
Cutter speed
Cutter pressure
gauge
Feed speed
Feed pressure
gauge
Feed direction
Cutter flow lever
System pressure
gauge