User`s manual

Autoclamp Goliath Guillotine Pipe Saw
30 06-150-520-MAN Wachs Subsea
Figure 5-11. Install the right clamp block on the blade
and snug the clamp knob.
6.
Using the 1-3/8” end wrench, turn the blade tension-
ing knob on the right clamp block to tighten the blade.
Figure 5-12. Tighten the tensioning knob to pull the
saw blade tight.
7.
Use the 1-3/8” wrench to tighten the clamp knobs on
both clamp blocks.