User`s manual

Chapter 3, Introduction to the Equipment: Machine Control
Wachs Subsea 06-150-520-MAN 17
MACHINE CONTROL
The subsea Goliath Guillotine has three mechanical drive
systems: the saw motion, the autoclamp mechanism, and the
hydraulic autofeed. The Goliath is fitted with a hydraulic
connector bulkhead for connection to hydraulic power.
Figure 3-3. The hydraulic fitting bulkhead on the saw
has connectors for the three drives.
Universal Control Panel (UCP)
For CE compliance, the Goli-
ath Guillotine must be oper-
ated using a Wachs Subsea
UCP.
Figure 3-4 illustrates the controls used to operate the Goli-
ath Guillotine. Chapter 5 includes detailed instructions.
NOTE