User`s manual

Chapter 2, Safety: Safe Operation of the Goliath Guillotine Pipe Saw
Wachs Subsea 06-150-520-MAN 11
• Check that all safety components are operating properly.
• Inspect it for damage or wear that could affect operation
and safe use of the machine. Repair any defective com-
ponent before using the machine.
• Make sure the machine is clean and properly lubricated.
• Make sure that the blade is sharp and in good condition.
A poor quality blade can cause difficult cutting and the
possibility of machine malfunction and/or injury.
• Check power connections to make sure they are in good
condition.
Operating Safety
• Stop the Guillotine cutting motion to adjust the work-
piece (shim, wedge, clear chips, etc.) or make any
machine adjustments.
• Use a support structure or catch device to prevent the
cut-off piece of the pipe from falling.
• Keep hydraulic hoses away from moving parts while
operating the machine.
Service Checklist
• Disconnect power from the Guillotine during service.
• Retract the saw bow before performing service. Do not
disassemble any components of the saw with the blade
in the workpiece.
Safe Lifting and Handling
Use care when lifting the Guillotine saw to avoid injury. A
lifting device (crane or hoist) is required for lifting and
mounting the saw.
• Use the lift eyes on the saw to lift it. Do not attach the
lifting device to other components.
• Do not rig or lift the Guillotine while power is attached.
Machine Weight
The weight of the Goliath Guillotine is 2100 lb (955 kg).