User`s manual

Autoclamp Goliath Guillotine Pipe Saw
8 06-150-520-MAN Wachs Subsea
CAUTION
This safety alert, with the personal injury hazard symbol,
indicates a potentially hazardous situation that, if not
avoided, could result in minor or moderate injury.
Protective Equipment Requirements
Protective Clothing
Wear safety shoes when operating or servicing the equip-
ment. Serious injury could result from dropping the
machine or its components.
Gloves should be worn when
cleaning up chips and other
cutting debris. Chips can be
very sharp and can cause
serious cuts. Do not wear
gloves when the machine
is operating.
Do not wear gloves while operating the machine. Gloves
can become entangled in moving parts, resulting in serious
injury. Gloves may be worn when setting up the machine or
cleaning up after the operation, but take them off when
operating the machine.
Eye Protection
Always wear impact-resistant eye protection while operat-
ing or working near this equipment.
For additional information on eye and face protection, refer
to Federal OSHA regulations, 29 Code of Federal Regula-
tions, Section 1910.133., Eye and Face Protection and
American National Standards Institute, ANSI Z87.1, Occu-
pational and Educational Eye and Face Protection.
Hearing Protection
This equipment can produce noise levels above 80 dB.
Hearing protection is required when operating the equip-
ment. The operation of other tools and equipment in the
area, reflective surfaces, process noises, and resonant struc-
tures can increase the noise level in the area.
For additional information on hearing protection, refer to
Federal OSHA regulations, 29 Code of Federal Regulations,
Section 1910.95, Occupational Noise Exposure and ANSI
S12.6 Hearing Protectors.
NOTE