User`s manual

Autoclamp Goliath Guillotine Pipe Saw
6 06-150-520-MAN Wachs Subsea
• KEEP CLEAR OF MOVING PARTS. Keep hands, arms, and
fingers clear of all rotating or moving parts. Always turn
the machine off and disconnect the power source before
doing any adjustments or service.
•
SECURE LOOSE CLOTHING AND JEWELRY. Secure or
remove loose-fitting clothing and jewelry, and securely
bind long hair, to prevent them from getting caught in
moving parts of the machine.
•
FOLLOW SAFE PROCEDURES FOR HANDLING LUBRICANTS.
Refer to the manufacturer’s instructions and the Mate-
rial Safety Data Sheets.
Safe Operating Environment
• Do not use this equipment in a potentially explosive
atmosphere. Fire or explosion could result, with the risk
of serious injury or death.
• Provide adequate lighting to use the equipment, in
accordance with worksite or local regulations.
•
KEEP WORK AREA CLEAR. Keep all clutter and nonessen-
tial materials out of the work area. Only people directly
involved with the work being performed should have
access to the area.
Operating and Maintenance Safety
• This equipment is to be operated and maintained only
by qualified, trained personnel.
• Make sure the equipment is stable when attached to the
workpiece for the operation. Ensuring stability of the
installed tool is the responsibility of the operator.
• Make sure the workpiece is supported adequately for
installation of the equipment. This includes supporting
any workpiece “fall-off” section when severing the
workpiece. Ensuring support of the workpiece is the
responsibility of the operator.
• Tooling on any cutting equipment—including lathe
tools, saw blades, milling tools, etc.—may get very hot.
Do not touch tooling until you have made sure it is cool
enough to handle.
• Wear gloves when removing or cleaning up chips and
cutting debris. Chips can be very sharp and cause cuts.
• Before performing any service on the equipment, dis-
connect the power source. Follow all lock-out/tag-out
procedures required at the worksite.