User`s manual

Goliath Guillotine Pipe Saw

52 Part No. 06-150-520-MAN, Rev. 0-0607 E.H. Wachs Company

Figure 5-52. Set the clamping direction lever to the

RETRACT position.

Open both clamping drive levers (down position) at

the same time to retract the autoclamp drive. When the

clamp pressure equalizes with the system pressure, the

clamp is fully retracted.

Figure 5-53. Put both clamping levers down at the

same time to retract the clamping drive.

Close both clamping drive levers (up position) at the

same time.