User`s manual

Goliath Guillotine Pipe Saw
46 Part No. 06-150-520-MAN, Rev. 0-0607 E.H. Wachs Company
Figure 5-43. Set the cutting speed lever to the desired
cutting speed.
3.
If the saw begins to chatter or bind, slow the cutting
speed lever.
4.
When the cut is complete, set the cutting speed lever
back to 0. Close the cutting drive lever by moving it to
the up position.
Figure 5-44. When the cut is complete, set the cutting
speed lever back to 0. Then return the cutting drive
lever to the off (up) position.