User`s manual

Chapter 5, Operating Instructions: Operating the Machine with the Topside Control Unit
E.H. Wachs Company Part No. 06-150-520-MAN, Rev. 0-0607 41
Figure 5-34. Connect the clamping drive hoses to the
saw as shown.
2.
Connect the cutting drive hoses from the TCU or hose
reel to the fittings on the saw bulkhead as shown in
Figure 5-35.
Figure 5-35. Connect the cutting drive hoses to the
saw as shown.
3.
For machines with hyraulic autofeed, connect the
autofeed drive hoses from the TCU or hose reel to the
fittings on the saw bulkhead as shown in Figure 5-36.
Clamping drive pressure
Clamping drive return
Cutting drive pressure
Cutting drive return