User`s manual

Goliath Guillotine Pipe Saw
40 Part No. 06-150-520-MAN, Rev. 0-0607 E.H. Wachs Company
Figure 5-32. Connect the clamping drive hoses to the
TCU (for machines with hydraulic clamping mecha-
nism).
5.
If your Goliath Guillotine is equipped with a hydraulic
feed drive, connect the feed drive hose set to the feed
drive fittings on the back of the TCU.
Figure 5-33. Feed drive connectors (for machines
with hydraulic feed drives).
Connecting Hoses to the Goliath
1.
Connect the clamping drive hoses from the TCU or
hose reel to the fittings on the saw bulkhead as shown
in Figure 5-34.
CLAMPING DRIVE
PressureReturn
FEED DRIVE
PressureReturn