User`s manual

Goliath Guillotine Pipe Saw
38 Part No. 06-150-520-MAN, Rev. 0-0607 E.H. Wachs Company
3.
Remove the chain cross pin from the screw hook and
unwrap the chain from the workpiece.
4.
Carefully move the saw away from the workpiece
with the crane.
OPERATING THE MACHINE WITH THE TOPSIDE
CONTROL UNIT
This section describes how to install and operate the saw
using the topside control unit (TCU).
Brief instructions for operating the TCU are on the instruc-
tion label on the top of the unit.
Figure 5-29. Instruction label on the topside control
unit.
Connecting the Hoses
Connecting Hoses to the TCU
1.
Wipe all hose couplers with a clean, lint free cloth
before making connections.
2.
Connect the hoses from the hydraulic power unit
(HPU) to the HPU fittings on the back of the topside
control unit (TCU).