User`s manual

Goliath Guillotine Pipe Saw
26 Part No. 06-150-520-MAN, Rev. 0-0607 E.H. Wachs Company
Figure 5-10. Install the right clamp block on the
blade and snug the clamp knob.
6.
Using the 1-3/8” end wrench, turn the blade tension-
ing knob on the right clamp block to tighten the blade.
Figure 5-11. Tighten the tensioning knob to pull the
saw blade tight.
7.
Use the 1-3/8” wrench to tighten the clamp knobs on
both clamp blocks.