User`s manual

Chapter 5, Operating Instructions
E.H. Wachs Company Part No. 06-150-520-MAN, Rev. 0-0607 19
Chapter 5
Operating
Instructions
This chapter includes instructions for three Goliath configu-
rations:
• standard machine
• autoclamp machine with bulkhead for topside control
• autoclamp machine with hydraulic autofeed and bulk-
head for topside control.
You should lubricate the Goliath saw before every cut. See
lubrication instructions in Chapter 6.
LIFTING THE SAW
The Goliath is provided with four eye hooks for lifting it
with a crane. There are ten threaded holes in the frame for
mounting eye hooks; put the hooks into the appropriate
holes for the way you are mounting the saw on the work-
piece. Specific lifting instructions are included in each sec-
tion of this chapter.
In This Chapter
LIFTING THE SAW
INSTALLING THE BLADE
USING THE AUTOFEED
OPERATING THE STANDARD
M
ACHINE
OPERATING THE MACHINE WITH
THE TOPSIDE CONTROL UNIT