User`s manual

Chapter 6: Routine Maintenance Goliath Guillotine Pipe Saw
56 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 6-5. There are two fittings on the ends of the
feed frame (top photo), and six fittings on the feed
shaft mount and one on the feed slide housing (bottom
photo).
Also apply grease to the bow guide plate at the ends of the
frame. Use a brush or a clean, dry cloth to wipe grease onto
the plates.
Figure 6-6. Grease the bow guide plates on both sides
of the frame (one side shown).