User`s manual

Goliath Guillotine Pipe Saw Chapter 6: Routine Maintenance
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 53
Chapter 6
Routine Maintenance
Grease all grease points on the Goliath Guillotine every
time you use the machine.
GREASE POINTS
Grease the fittings in the following locations on the Goliath:
• Two on top of the saw bow (one on each side)—
Figure 6-1.
Figure 6-1. There are two grease fittings on the top of
the saw bow.
• Two on the feed drive side of the frame for the frame
guide shaft—Figure 6-2.
In This Chapter
GREASE POINTS