User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
50 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-56. When the cut is complete, set the cutting
speed lever back to 0. Then return the cutting drive
lever to the off (up) position.
You may need to
remove the blade
before retracting
the bow.
8.
Using the feed handle on the end of the feed screw,
retract the saw bow fully from the workpiece.
Figure 5-57. Turn the feed handle clockwise to
retract the saw bow. (Note that the handle can be
mounted on either end of the feed screw. Turn it
Feed handle