User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
44 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-45. Connect the clamping drive hoses to the
TCU (for machines with hydraulic clamping mecha-
nism).
5.
The Goliath Guillotine does not have a hydraulic feed
drive. Leave the feed drive fittings on the TCU dis-
connected.
Figure 5-46. Feed drive connectors (for machines
with hydraulic feed drives).
Connecting Hoses to the Goliath
1.
Connect the clamping drive hoses from the TCU or
hose reel to the fittings on the saw bulkhead as shown
in Figure 5-47.
CLAMPING DRIVE
PressureReturn
FEED DRIVE
PressureReturn