User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 43
Figure 5-43. HPU hose fittings on the back of the
control unit.
3.
Connect the cutting drive hose set from the machine or
from the hose reel to the cutting drive fittings on the
back of the TCU. The hoses and fittings are color
coded.
Figure 5-44. Connect the cutting drive hoses to the
TCU.
4.
If the machine has a hydraulic clamping mechanism,
connect the clamping drive hose set to the clamping
drive fittings on the back of the TCU. The hoses and
fittings are color coded.
HPU FITTINGS
PressureReturn
CUTTER DRIVE
PressureReturn