User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
42 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-41. Close both clamping circuit valves after
you have disengaged the autoclamp.
7.
Carefully move the saw away from the workpiece
with the crane.
OPERATING THE MACHINE WITH THE TOPSIDE
CONTROL UNIT
This section describes how to install and operate the saw
using the topside control unit (TCU).
Brief instructions for operating the TCU are on the instruc-
tion label on the top of the unit.
Figure 5-42. Instruction label on the topside control
unit.
Connecting the Hoses
Connecting Hoses to the TCU
1.
Wipe all hose couplers with a clean, lint free cloth
before making connections.
2.
Connect the hoses from the hydraulic power unit
(HPU) to the HPU fittings on the back of the topside
control unit (TCU).