User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 35
Figure 5-28. The machine-mounted control system
allows you to operate the cutting and autoclamp
drives at the machine.
Connecting the Hoses
1.
Connect the hydraulic pressure hose to the pressure
side connector on the saw.
2.
Connect the return hose to the return side connector on
the saw.
Figure 5-29. Connect the hydraulic hoses to the con-
nectors on the Goliath.
Pressure side connector (from HPU)
Return side connector (to HPU)