User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
34 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-27. Turn the chain tensioning nut counter-
clockwise to loosen the chain.
3.
Remove the chain cross pin from the screw hook and
unwrap the chain from the workpiece.
4.
Carefully move the saw away from the workpiece
with the crane.
OPERATING THE AUTOCLAMP MACHINE
WARNING:
Follow the instructions in this section to set up and operate
the Goliath Guillotine configured with the autoclamp drive,
using the machine-mounted control system.