User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 29
Figure 5-18. If necessary, turn the feed handle clock-
wise to retract the saw bow before mounting the saw.
1.
Attach the saw to a crane or lift as described in “Lift-
ing the Saw” earlier in this chapter.
2.
Lift the saw and position it so that the saddle is against
the workpiece. Wrap the clamping chain around the
workpiece and pull it snug.
Figure 5-19. With the crane holding the saw in place,
wrap the clamping chain around the workpiece.
3.
Insert the closest cross pin of the chain into the clamp
screw hook.