User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
24 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-12. Tighten the clamp knob on both clamp
blocks to secure the blade for cutting.
USING THE AUTOFEED
The mechanical autofeed mechanism works the same for all
configurations of the Goliath Guillotine. Use this procedure
to engage and disengage the autofeed when cutting with the
saw.
The autofeed is driven from the cam wheel that moves the
saw bow for cutting. A trip pin on the underside of the cam
wheel strikes the feed shaft on each revolution, turning the
shaft and rotating the feed worm gear.