User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 21
• a coarse blade used for heavy wall or multi-strand pipe
• a fine blade used for thin-wall, single-strand pipe.
Figure 5-7. Goliath Guillotine blade. The mounting
holes at each end are held by the dowel pins in the
clamp blocks.
Mount the saw onto the workpiece before installing the
blade.
There are two blade clamp blocks that hold the blade in
place, one on each end of the saw bow. The block on the
right side (when facing the saddle) has a knob for tensioning
the blade, as shown in Figure 5-8.
Figure 5-8. The photos show the clamp blocks on the
Goliath saw bow. The right block (bottom photo) has
a blade tensioning knob.
Clamping knobs
Blade tensioning knob