User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions

E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 19

Figure 5-3. Eyebolts can be screwed into the

threaded holes I and J in the end of the frame.

To mount the saw on top of a horizontal pipe—

• Connect chains to eyebolts installed in frame locations I

and J and lift the saw in a vertical orientation.

Figure 5-4. Use eyebolt locations I and J to lift the

saw vertically onto a horizontal pipe.

To mount the saw on the side of a horizontal pipe—

• Connect chains to eyebolts installed in frame locations

G and I and lift the saw on its side.