User`s manual

Chapter 5: Operating Instructions Goliath Guillotine Pipe Saw
18 Part No. 98-037-011-MAN, Rev. 3-0906 E.H. Wachs Company
Figure 5-1. Eyebolt locations on the Goliath Guillo-
tine. (Hooks are shown installed in locations A, B, C,
and D.) Location F is also used for the optional cool-
ant nozzle, as shown. Locations G, H, I, and J are on
the ends of the frame, as shown in Figure 5-2 and
Figure 5-3.
Figure 5-2. The eyebolts can be screwed into the
threaded holes G and H on the end of the frame.
F
I
H
G
D
C
A
B
J
E
H
G