User`s manual

Goliath Guillotine Pipe Saw Chapter 5: Operating Instructions
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 17
Chapter 5
Operating
Instructions
This chapter includes instructions for all three Goliath con-
figurations:
• standard machine
• autoclamp machine with machine-mounted controls
• autoclamp machine with bulkhead for topside control.
You should lubricate the Goliath saw before every cut. See
lubrication instructions in Chapter 6.
LIFTING THE SAW
The Goliath is provided with four eye hooks for lifting it
with a crane. There are ten threaded holes in the frame for
mounting eye hooks; put the hooks into the appropriate
holes for the way you are mounting the saw on the work-
piece. Specific lifting instructions are included in each sec-
tion of this chapter.
IMPORTANT
Always leave the
chains and lift
attached to the saw while cut-
ting.
In This Chapter
LIFTING THE SAW
INSTALLING THE BLADE
USING THE AUTOFEED
OPERATING THE STANDARD
M
ACHINE
OPERATING THE AUTOCLAMP
M
ACHINE
O
PERATING THE MACHINE
WITH THE TOPSIDE
C
ONTROL UNIT