User`s manual

Goliath Guillotine Pipe Saw Chapter 3: Introduction to the Goliath Guillotine
E.H. Wachs Company Part No. 98-037-011-MAN, Rev. 3-0906 11
MACHINE CONTROL
Two options are available for control of the Goliath Guillo-
tine: a machine-mounted control panel attached to the
machine frame, and the Wachs topside control unit (TCU)
for remote operation.
Machine-Mounted Control Panel
The machine-mounted control panel allows the Goliath to
be operated at the machine. Controls are provided for the
cutting drive and the optional autoclamp drive. Operating
instructions are in Chapter 5.
Figure 3-3. The photo illustrates the controls on the
machine-mounted control panel.
Figure 3-4. Instructions for the controls are included
on the top of the control panel.
Clamping
drive lever
Cutting
drive lever
Clamping circuit
return valve
Clamping circuit pressure valve
Clamping pressure gauge