User`s manual

Chapter 6, Routine Maintenance
E.H. Wachs Company Part No. 06-150-522-MAN, Rev. 1-0710 37
Chapter 6
Routine Maintenance
Grease all grease points on the Goliath Guillotine every
time you use the machine.
GREASE POINTS
Grease the fittings in the following locations on the Goliath:
• Two on top of the saw bow (one on each side)—
Figure 6-1.
Figure 6-1. There are two grease fittings on the top of
the saw bow.
• Two on the feed drive side of the frame for the frame
guide shaft—Figure 6-2.
In This Chapter
GREASE POINTS