User`s manual

Goliath Guillotine Pipe Saw
26 Part No. 06-150-522-MAN, Rev. 1-0710 E.H. Wachs Company
Figure 5-11. Install the right clamp block on the blade
and snug the clamp knob.
6.
Using the 1-3/8” end wrench, turn the blade tension-
ing knob on the right clamp block until there is a 1/8”
gap in the block.
Figure 5-12. Tighten the tensioning knob until there is
a 1/8” gap in the clamp block.
7.
Use the 1-3/8” wrench to tighten the clamp knobs on
both clamp blocks.
1/8” gap