User`s manual

Goliath Guillotine Pipe Saw

20 Part No. 06-150-522-MAN, Rev. 1-0710 E.H. Wachs Company

mounting eye hooks; put the hooks into the appropriate

holes for the way you are mounting the saw on the work-

piece. Specific lifting instructions are included in each sec-

tion of this chapter.

IMPORTANT

Always leave the

chains and lift

attached to the saw while cut-

ting.

Figure 5-2. Eyebolt locations on the Goliath Guillo-

tine. (Hooks are shown installed in locations A, B, C,

and D.) Location F is also used for the optional cool-

ant nozzle, as shown. Locations G, H, I, and J are on

the ends of the frame, as shown in Figure 5-3 and

Figure 5-4.

Figure 5-3. The eyebolts can be screwed into the

threaded holes G and H on the end of the frame.