User`s manual

Chapter 5, Operating Instructions
E.H. Wachs Company Part No. 06-150-522-MAN, Rev. 1-0710 19
Chapter 5
Operating
Instructions
You should lubricate the Goliath saw before every cut. See
lubrication instructions in Chapter 6.
Before operating the saw, remove the storage stand from the
top of the frame. The stand threads into the frame; screw it
out to remove it, and screw it back in when you are finished
using the saw.
Figure 5-1. Remove the storage stand from the saw
frame before operating the saw. The stand is screwed
into the saw frame.
LIFTING THE SAW
The Goliath is provided with four eye hooks for lifting it
with a crane. There are ten threaded holes in the frame for
In This Chapter
LIFTING THE SAW
INSTALLING THE BLADE
OPERATING THE MACHINE