Datasheet

WDGI 58H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2020-10-13 -4-
Options
Low temperature Order key
The encoder WDGI 58H with the output circuit types F24, G24, H24, I24, P24, R24, F05,
G05, H05, I05, P05, R05, 245, 524, 645 is also available with the extended temperature
range -40 °C up to +85 °C [-40 °F up to +185 °F] (measured at the flange).
ACA
Pressure equalising membrane Order key
The WDGI 58H shaft encoder is also optionally available with a pressure equalising
membrane. This prevents water from penetrating into the encoder housing in the case of
high air humidity.
The IP67 protection level, temperature range and salt spray resistance are maintained.
Resistant to chemicals and solvents in accordance with DIN EN ISO 2812-1.
ACR
Cable length Order key
The encoder WDGI 58H can be supplied with more than 2 m cable. The maximum cable
length depends on the supply voltage and the frequency; see www.wachendorff-
automation.com/atd
Please extend the standard order code with a three figure number, specifying the cable
length in decimetres.
Example: 5 m cable = 050
XXX = Decimeter