Datasheet

WDGI 58H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2020-10-13 -2-
Encoder WDGI 58H
•Rugged industrial standard encoder
•Housing cap die cast aluminum,
with particularly eco-friendly powder coating
•Up to 25000 PPR by use of high grad electronics
•Thru-Bore
•High protection class IP65, with oil seal
•Maximum mechanical and electrical safety
•High noise immunity
•Full connection protection with 10 VDC up to 30 VDC
•High output frequency 600 kHz/2 MHz
•Optional: -40 °C up to +85 °C,
Pressure equalising membrane
www.wachendorff-automation.com/wdgi58h
Resolution
Max. pulses per revolution
PPR
4096 ppr
Mechanical Data
Housing
Flangehollow shaft (through-bored)
Flange materialaluminum
Housing capdie cast aluminum, powder coated
Torque supportsincl. 1 torque support WDGDS10001
- 1. Spring plate
compensation
axial: ±0.8 mm, radial: ±0.2 mm
- Max. operating speed 6000 rpm up to max. protection rating
+60 °C
- 2. Cylinder pin 4 mmneeds accessories WDGDS10005
- Compensationaxial: ±0.5 mm, radial: ±1.5 mm, Max.
operating speed: 3000 rpm
HousingØ 58 mm
Shaft(s)
Shaft materialstainless steel
Starting torqueapprox. 2.2 Ncm at ambient
temperature
Fixingpermanently attached clambing ring
Shaft Ø 12 mm
Shaft lengthL: 44.5 mm
Max. Permissible shaft
loading radial
80 N
Max. Permissible shaft
loading axial
60 N
Bearings
Bearings type2 precision ball bearings
Nominale service life1 x 10'9 revs. at 100 % rated shaft
load
1 x 10'10 revs. at 40 % rated shaft
load
1 x 10'11 revs. at 20 % rated shaft
load
Max. operating speed 6000 rpm
Machinery Directive: basic data safety integrity level
MTTF
d
200 a
Mission time (TM)25 a
Nominale service life (L10h)1 x 10'11 revs. at 20 % rated shaft
load and 6000 rpm
Diagnostic coverage (DC)0 %
Electrical Data
Power supply VDC 10 - 30 VDC
Current consumptiontyp. 70 mA
Signal shapesquare-wave
Output circuitHTL inverted
ChannelsAB, ABN, and inverted signals
Outputpush-pull
Loadmax. 40 mA / channel
Signal level mAat 20 mA
Signal level H>H > Vcc - 2.5 VDC
Signal level L<L < 2.5 VDC
Output frequencymax. 200 kHz
Circuit protectionyes
Light reserve warningyes
General Data
Weightapprox. 220 g
Connectionscable or connector, radial
Protection rating (EN 60529)IP65 all around
Operating temperatureConnector: -40 °C up to +85 °C,
cable: -20 °C up to +80 °C, (Option
ACA: -40 °C up to +85 °C)
1 Vpp: -10 °C up to +70 °C
Storage temperatureConnector: -30 °C up to +85 °C,
cable: -30 °C up to +80 °C, option
ACA: -40 °C up to +85 °C
More Information
General technical data and safety instructions
http://www.wachendorff-automation.com/gtd
Options
http://www.wachendorff-automation.com/acc