Datasheet

WDGI 58B Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2020-10-08 -4-
Options
Low-friction bearings Order key
The encoder WDGI 58B is also available as a particularly smooth-
running low-friction encoder. The starting torque is thereby changed to ≤ 0.5 Ncm and the
protection class at the shaft input to IP50.
AAC
Shaft with flat Order key
The encoder WDGI 58B can be supplied with a shaft with flat.AAF
IP67 Shafts sealed to IP67 (not for 1 Vpp Sin/Cos) Order key
The encoder WDGI 58B can be supplied in a full IP67 version.
Max. RPM: 3500 rpm
Permitted Shaft-Loading, axial: 100 N
Permitted Shaft-Loading, radial: 110 N
Max. PPR: 2500 ppr
Starting-torque: approx. 4 Ncm at ambient temperature
AAO
Pressure equalising membrane Order key
The WDGI 58B shaft encoder is also optionally available with a pressure equalising
membrane. This prevents water from penetrating into the encoder housing in the case of
high air humidity.
The IP67 protection level, temperature range and salt spray resistance are maintained.
Resistant to chemicals and solvents in accordance with DIN EN ISO 2812-1.
ACR
Cable length Order key
The encoder WDGI 58B can be supplied with more than 2 m cable. The maximum cable
length depends on the supply voltage and the frequency; see www.wachendorff-
automation.com/atd
Please extend the standard order code with a three figure number, specifying the cable
length in decimetres.
Example: 5 m cable = 050
XXX = Decimeter