Datasheet

Ordering information:
Output circuit: Output circuit inv.:
G24 = 10-30 VDC, HTL I24 = 10-30 VDC, HTL
G05 = 5 VDC, TTL I05 = 5 VDC, RS422 TTL comp.
H30 = 5-30 VDC, HTL R30 = 5-30 VDC, HTL
245 = 10-30 VDC, RS422 TTL comp.
SIN = 5 V, 1 Vss Sinus (only to
1024 and 2048 PPR)
Inverted only for cable or connector:
K2, L2, K3, L3, S4, S5, SB8, SC8, SB12, SC12
Channels: AB, ABN (SIN: AB)
Pulses per revolution:
2, 10, 15, 20, 24, 36, 40, 48, 50, 60, 64, 72, 87, 90, 100, 120,
125, 127, 128, 150, 160, 180, 200, 216, 240, 250, 254, 256,
300, 314, 320, 360, 400, 500, 512, 571, 600, 625, 720, 750,
768, 800, 810, 900, 1000, 1024, 1200, 1250, 1270, 1440,
1500, 1800, 2000, 2048, 2400, 2500, 3000, 3600, 4000,
4096, 4685, 5000.
Other PPR´s on request
Electrical connections:
Cable:
K2 = axial, 2 m, shield not connected (standard)
L2 = axial, 2 m, shield connected to encoder housing
K3 = radial, 2 m, shield not connected (standard)
L3 = radial, 2 m, shield connected to encoder housing
Connector:
S2 = 7-pin axial SB4 = 4-pin axial
S3 = 7-pin radial SC4 = 4-pin radial
S4 = 12-pin axial SB5 = 5-pin axial
S5 = 12-pin radial SC5 = 5-pin radial
S6 = 6-pin radial SB8 = 8-pin axial
S7 = 4-pin axial SC8 = 8-pin radial
SB12 = 12-pin axial
SC12 = 12-pin radial
Please note the connection configuration under
“General technical data”, Page 122
Options:
Empty = without option
Low-temperature -40°C...+80°C = ACA
Shaft with flat = AAF
Low-friction bearings = AAC
Shaft sealed to IP 67 = AAO
Cable length = in decimetres
WDG 58B
WDG 58B
500 ABN G24 K3
Example
Your encoder
Valve-connector S7, 4-pin
Sensor-connector (M12x1) SB, SC, 4-, 5-, 8-, 12-pin
MIL-connector S6, 6-pin
All dimensional specifications in mm.
Further technical information on www
.wachendorff.de/gtd
Matching accessories on www.wachendorff.de/acs
Shaft with flat:
The encoder WDG 58B can be supplied with a shaft with flat. When
ordering please add the suffix code - AAF.
Low-friction bearings:
The encoder WDG 58B is also available as a particularly smooth-running
low-friction encoder. The starting torque is thereby changed to
< 0,5 Ncm and the protection class at the shaft input to IP50. When
ordering please add the suffix code - AAC.
Options:
Amended specifications for shaft sealed to IP67.
Shafts sealed to IP67:
The encoder WDG 58B can be supplied in a full IP67 version. When
ordering please add the suffix code - AAO.
Low-temperature:
The encoder WDG 58B with the output switches G24, I24, G05, I05 and
245 is also available with the extended temperature range
-40°C...+80°C (measured at the flange). When ordering please add the
suffix code - ACA.
Max.
RPM
Permitted
Shaft-Loading
axial radial
Max.
PPR
(no 1Vss)
Starting-
torque
3.500 100N 110N 2.500 ca. 4 Ncm
Drawing 58B-AAF
Cable length:
The encoder WDG 58B can be supplied with more than 2 m cable.
Please extend the standard order code with a three figure number,
specifying the cable length in decimetres.
Order No.:
Wachendorff Automation GmbH & Co. KG
Industriestraße 7 • D-65366 Geisenheim
Phone: [phone] • Fax: [phone]
eMail: [e-mail] • www.wachendorff.de
15.11.06 / Specifications without engagement, subject to errors and modifications. 2 of 2