User Manual

Programming kit SFUR0KIT
5
Figure 7: : Automatic search
If communication panel visualizes the writing “Successful read” as shown in Figure 9, it
means that communication works properly and the system has been set correctly.
Otherwise it will be necessary to check each previous step.
Figure 8: Reading completed successfully
5. Overview
Menu and toolbar (Figure 4 and Figure 5) have already been introduced in the previous
chapter about automatic communication mode.
The manual mode can be useful if the software should be connected to more devices
using different ports with a serial converter other than the programming module, for
example WK107USB. For this same reason, it might be necessary to set for parameter
“Slave ID” a value other than 255.
The buttons
are conceived for the management of configuration files, which
include the selected device and the values of all parameters and set-points.
If option “Read” is selected in the field Processes (Figure 10), it is possible to visualize
the values of process and set-point for the connected device.
Figure 9: Processes area
The button “Plot” opens a window for the graphic visualization of processes (Figure 11 ).