Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
TRACK HEAD OPTIONS
W2 LINE VOLTAGE / CFL TRACK HEAD
1. Set circuit selector to 0.
2. Set locking arm to unlock position.
3. Align this tab to the slot on the track (Fig 9a).
4. Insert adapter (Fig 9b, Fig 9c).
5. Set locking arm to lock position.
6. Set circuit selector to 1 or 2.
CONVERTER CV2TLV / CV2TMH FOR J TRACK HEADS
1. J track head insert converter(Fig 10a).
2. Set J track head ’s locking arm to lock position.
3. Set circuit selector to 0.
4. Set converter’s locking arm to unlock position.
5. Align this tab to the slot on the track(Fig 10b).
6. Insert adapter.
7. Set converter’s locking arm to lock position.
8. Set circuit selector to 1 or 2.
FIG 9B: INSERTED ADAPTER
FIG 10A: J TRACK HEAD TO BE INSERTED
INSERTED CONVERTERFIG 10B: CONVERTER TO BE INSERTED
FIG 9A: ADAPTER TO BE INSERTED
FIG 9C
INSTALLATION INSTRUCTION
W Track Surface Mount 120V
WT4, WT8, WT12