Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
ACCESSORY OPTIONS
• Make sure power is o before connecting.
• Note the polarity indicator of the track and accessories.
The I Power Connector (WPC) must be placed directly
between two track sections as shown in Fig 5 before
securing the screw.
FIELD CUTTING
Cut the track, insulation material, and copper busbars with
one straight cut and remove any burrs that may have
resulted from the cut.
End Caps (WEC) should be inserted into the track
and secured as shown in Fig 6.
FIG 5: WPC INSTALLATION
FIG 6: WEC INSTALLATION
FIG 7: FIELD CUTTING
CUT FLUSH
INSTALLATION INSTRUCTION
W Track Surface Mount 120V
WT4, WT8, WT12